Author Topic: Inspired by Jamie - Trolley cradle  (Read 2393 times)

0 Members and 1 Guest are viewing this topic.

Offline robin_davies

  • Class member
  • Newb
  • *
  • Posts: 16
  • Karma: +4/-0
Inspired by Jamie - Trolley cradle
« on: May 01, 2023, 08:04:16 PM »
I went for it! Inspired by Jamie’s write-up and good advice I have just finished phase 1 of project trolley cradle. Next I need to think about fixing my angle irons to the cradle and to the 25mm steel box section of the trolley.
Bolts or u-clamps? Thinking u-clamps as I only have room for one bolt in 25mm section and it will pivot.
Any thoughts / advice would be welcomed :)

Hope to be at Weymouth on the Saturday (with or without Badgers but definitely with Holly).  We look forward to meeting some of you then!