« previous next »
Pages: [1]   Go Down

Author Topic: Trapeze lines - latest thinking  (Read 4530 times)

0 Members and 1 Guest are viewing this topic.

Offline robin_davies

  • Class member
  • Newb
  • *
  • Posts: 16
  • Karma: +4/-0
Trapeze lines - latest thinking
« on: December 27, 2022, 06:16:22 PM »
Hello, what’s the latest thinking for replacement trapeze lines? What material and diameter range?
Would something like this work?
2.5MM MARLOW EXCEL D12 DYNEEMA

Thanks
Robin
Logged

Offline dave_ching

  • Administrator
  • Guru's Guru
  • *****
  • Posts: 584
  • Karma: +20/-2
Re: Trapeze lines - latest thinking
« Reply #1 on: December 31, 2022, 09:26:36 AM »
I'd go 3mm
Logged

Offline JP233

  • Administrator
  • Guru's Guru
  • *****
  • Posts: 655
  • Karma: +33/-13
Re: Trapeze lines - latest thinking
« Reply #2 on: December 31, 2022, 12:33:04 PM »
I had 1.5mm for a bit, but they snapped so now running 3mm minimum.
Logged
Thanks
Jamie

Offline robin_davies

  • Class member
  • Newb
  • *
  • Posts: 16
  • Karma: +4/-0
Re: Trapeze lines - latest thinking
« Reply #3 on: January 02, 2023, 07:33:54 PM »
Thank you Dave and Jamie, that’s good to know. 
Jimmy mentioned having an adjustable section spliced into the lines…I’ve bought a splicing kit and I’m learning the basics, but what is the splice needed for the adjustable section in the trap line? Any videos or previous posts on this?

Logged
Pages: [1]   Go Up
« previous next »